Correct and safe installations

To achieve the highest standard of safety, a cable or pipe transit must be installed correctly. As there are many different types of frame – which may be either welded, bolted or glued into position – and insert block, it is essential that installers known when to use the most appropriate installation method.

For more information, please view following instructions, videos or download manuals as PDFs.

Use bolts for this transit

This transit was designed for areas where welding is prohibited or welding induced stress levels making welding unacceptable. This transit is therefore to be fastened by bolts to ensure installation quality.

The transit is made of two angle bars 60x6 and two gables in galvanized mild steel.

Standard frames come in eight sizes: 1, 2, 3, 4, 5, 6, 7, and 8. 
The internal width can be 60.5 ± 1 (Size 1,3,5,7) or 120.5 ± 1 (2,4,6,8).

Standard frames in four different sizes: 2, 4, 6 and 8 which mark different heights. All have the same width.

Can be installed in horizontal combinations.

Note that there can be limitations in type-approvals & certificates, making certain sizes inapplicable

Please see information drawings for detailed data.

For size and weight please see tables in the MCT Online Catalogue:

• MCT Catalogue 

General

The system consists of a frame, rubber blocks and a compression unit. The frame is casted or bolted to a structure and packed with rubber blocks suited for each cable and pipe dimension. The compression unit is inserted to compress the rubber blocks against cables and pipes to establish a tight seal.

• The EMC systems is also approved for grounding and bonding (G&B) applications.

Benefits of MCT Brattberg E-systems

• Protects against electrical and magnetic interference (EMI), “bugging”, electronic sabotage (SEMP) and static electricity (ESD).
• Assists cable management.
• Integral earthing between cables and wall screen.
• Also seals the penetration against the passage of fire, water, gas, sound and environmental hazards.
• Special E-Series for Grounding and Bounding
• System can be dismantled and re-used.