Skip to Content

E-STG Endpacking

For completing the seal with EMC and G&B capabilites
At sea On land

Installed between compression plate and the top of the frame, completing the seal. Manufactured from Lycron with galvanized mild steel or stainless steel hardware.

Also available as:
STG Endpacking
Also available as:
STG Endpacking

STG - 600g (1.32lb)
Compression plate - 240g (0.53lb)

Compression plate is inserted above the top row of blocks. The bolt is tightened to compress the system enabling installation of the STG endpacking.
Material: Cast iron hot galvanized.

C-STG EMC has rounded corners for E-RGSC transits (radius 20)
Multiple frames: CL-STG for endpacking left side, CR-STG for endpacking right side

Compression plate
C-STG endpacking centre (single frames)
CL-STG endpackinge left (multiple frames)
CR-STG endpackinge right (multiple frames)

Lycron material for high performance

The system consists of components made of lycron. These are halogen free and flame retardant.

See more

Multiple frames

The system can be installed with multiple frames for a greater capacity

See more

Similar products

Stayplate

For increased stability

To be placed between each row of blocks.

See specs and variations  for Stayplate

STG Endpacking

For completing the seal

Installed between compression plate and the top of the frame.

See specs and variations  for STG Endpacking

PTG Presswedge

For completing the seal

Can be installed anywhere in the frame.

See specs and variations  for PTG Presswedge

E-PTG Presswedge

For completing the seal with EMC and G&B capabilites

Can be installed anywhere in the frame. With protection against EMI, EMP and ESD

See specs and variations  for E-PTG Presswedge