Swan Neck Frame
The MCT Brattberg Swan Neck frame is designed for rooftop installations. It features either one or two openings. It is to be used with corresponding MCT Brattberg components to form a complete sealing solution.
Attachment is done by bolting.
Correct and safe installations
To achieve the highest standard of safety, a cable or pipe transit must be installed correctly. As there are many different types of frame – which may be either welded, bolted or glued into position – and insert block, it is essential that installers known when to use the most appropriate installation method.
Similar products
RGPH
Can be designed to seal 1-36 cables between 4-110mm in diameter, depending on pressure.
See specs and variations for RGPH
RGPM
RGPM pressure seal approved for a continuous pressure up to 15 bar with almost unlimited designations of numbers and dimensions of cables and pipes.
See specs and variations for RGPM
MSR glands
The MSR glands are designed to seal up to 8 cables between 4 and 32 mm (0.16” and 1.26”) diameter.
See specs and variations for MSR glands
SR cable and pipe seals
The seal can be supplied cut to allow pre terminated cable to be installed. It is supplied with a center core providing a seal prior to cable installation.
See specs and variations for SR cable and pipe seals