RGB
These cable and pipe transits are used in high-risk land-based environments to minimize danger by preventing the spread of fire, water, gas, chemicals and other hazards substances.
RGB frame type is casted into a concrete wall or floor. It is manufactured from a 60x60x6 mm angle bar.
Overview
RGB sizes
The standard transit is made of an angle bar 60x60x6 mm, in mild steel, stainless steel or aluminium. The mild steel transits are supplied with two types of surface finish, primer or galvanized.
Standard frames come in eight sizes: 1, 2, 3, 4, 5, 6, 7, and 8.
The internal width can be 60.5 ± 1 (Size 1,3,5,7) or 120.5 ± 1 (2,4,6,8).
Note that there can be limitations in type-approvals & certificates, making certain sizes inapplicable.
All the frames can be manufactured in combinations.
RBGO transit are of the same type as the RGG transits but with one of the ends removable which enables installation where cables already have been pulled.
For further technical information see tables in our Online Catalogue:
Pipe Transits
Performance
Resistance to fire:
Enclosure degree of protection Nema 250:
3R; 4X; 12 - Nema 250-1st
Enclosure degree of protection IP:
IP65; IP66; IP67; IP68 2 meters 60 min - IEC 60529
Lycron data
Read Lycron data sheet:
Data sheet Lycron
Lycron is halogen free and flame retardant.
For all approvals, please also see Certificates
Correct and safe installations
To achieve the highest standard of safety, a cable or pipe transit must be installed correctly. As there are many different types of frame – which may be either welded, bolted or glued into position – and insert block, it is essential that installers known when to use the most appropriate installation method.
For more information, please view following instructions, videos or download manuals as PDFs.
Download pdf instructions
Multiple frames
HORIZONTAL MULTIPLE FRAMES
Horizontal multiple frames are described by listing the frame type and size x the desired number of horizontal openings.
Designation (starting at bottom):
Frame type 6x4
VERTICAL MULTIPLE FRAMES
Vertical multiple frames are described by listing the bottom frame type and size + the next frame type and size.
Designation (starting at bottom):
(frame type) 6+6+4 and (frame type) 6+4+2
VERTICAL AND HORIZONTAL MULTIPLE FRAMES
List the entire vertical frames x the desired number of horizontal repetitions.
Designation (starting at bottom):
(frame type) 6+4+2x4
NOTE: All multiple frame designations must be preceded by the frame type.
Insert Blocks
Handiblock
Newly developed Insert Block that provides greater flexibility, simple and safe installation.
Read more
U-Block
The U-Block is used to convert the external dimensions of Insert Blocks, AddBlocks and Spare Blocks to the next modular size.
Read more
Spareblock
The unused space in the frame is filled with solid spare blocks. Using the spare blocks allows the option of fitting new cable in the future.
Read more
Components
STG Endpacking
Installed between compression plate and the top of the frame, completing the seal.
Read more
